Square Wave TIG 200 vs Power MIG 260

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Square Wave TIG 200	Power MIG 260
Process	AC/DC TIG and stick. Source	MIG and flux-cored. Source
Output amp range	120 V: TIG 10–125 A and stick 10–90 A. 230 V: TIG 10–200 A and stick 10–170 A. A footnote prints 120 V AC TIG 110 A / 25%. Source	30–300 A. Wire feed speed 50–700 ipm (1.3–17.7 m/min). Source
Rated duty cycle	120 V TIG: 125 A/25%, 100 A/40%, 85 A/60%. 120 V stick: 75 A/20%, 65 A/60%. 230 V TIG: 200 A/25%, 160 A/40%, 130 A/60%. 230 V stick: 170 A/20%, 100 A/60%. Source	250 A / 26.5 V / 40%. Source
Input voltage and plug	120/1/50/60 and 230/1/50/60. Input current at those rated outputs runs from 14 A to 21 A on 120 V and from 13 A to 25 A on 230 V. The highest 120 V figure is 21 A and the highest 230 V figure is 25 A. 120/230 V input cords are included. Source	208/230/460/575 V, 1-phase, 60 Hz. Input current at rated output: 59/55/27/21 A in that voltage order. The 230 V figure is 55 A. This check treats that 230 V figure as the 240 V outlet class. Source
Wire or rod size	Not published by manufacturer Source	Not published by manufacturer Source
Weight	46 lb (21 kg). Dimensions 14 x 10.75 x 19.25 in. Source	247 lb (112 kg). Dimensions 37.3 x 18 x 40.4 in. Source
Material thickness	Not published by manufacturer Source	Not published by manufacturer Source