Square Wave TIG 200 vs TIG200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Square Wave TIG 200	TIG200
Process	AC/DC TIG and stick. Source	DC TIG and stick. Source
Output amp range	120 V: TIG 10–125 A and stick 10–90 A. 230 V: TIG 10–200 A and stick 10–170 A. A footnote prints 120 V AC TIG 110 A / 25%. Source	On 240 V: TIG 190 A and stick 185 A. On 120 V: TIG 145 A and stick 140 A. The lower limit is 10 A for either process. Source
Rated duty cycle	120 V TIG: 125 A/25%, 100 A/40%, 85 A/60%. 120 V stick: 75 A/20%, 65 A/60%. 230 V TIG: 200 A/25%, 160 A/40%, 130 A/60%. 230 V stick: 170 A/20%, 100 A/60%. Source	Not published by manufacturer Source
Input voltage and plug	120/1/50/60 and 230/1/50/60. Input current at those rated outputs runs from 14 A to 21 A on 120 V and from 13 A to 25 A on 230 V. The highest 120 V figure is 21 A and the highest 230 V figure is 25 A. 120/230 V input cords are included. Source	Dual-voltage 120/240 V input. Input amperes are not in that description. Source
Wire or rod size	Not published by manufacturer Source	Not published by manufacturer Source
Weight	46 lb (21 kg). Dimensions 14 x 10.75 x 19.25 in. Source	Not published by manufacturer Source
Material thickness	Not published by manufacturer Source	7/16-inch steel in a single pass is tied to the 190 A, 240 V TIG sentence. The 10 A floor is described as mild enough for 24-gauge sheet metal. A 120 V thickness is not printed. Source