Home CompareSyncrowave 212 vs Handler 140EZ
Syncrowave 212 vs Handler 140EZ
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Syncrowave 212 | Handler 140EZ |
|---|---|---|
| Process | AC/DC TIG (GTAW), pulsed DC TIG (GTAW-P), DC stick (SMAW), and MIG (GMAW) with a Spoolmate 150. | MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator. |
| Output amp range | AC/DC TIG: 20–210 A. DC stick: 30–200 A. MIG: 30–175 A. The specifications table narrows 120 V DC TIG to 20–140 A and 240 V DC stick to 35–160 A. | 30–140 A. |
| Rated duty cycle | Quick specs lead with 130 A at 15.2 V, 60% duty cycle. The table adds, at 60%: 120 V DC TIG 110 A at 14.4 V, and 240 V DC stick 120 A at 24.8 V. It also prints 210 A at 20% and 120 A at 100% on the AC/DC TIG duty column, without tying those two lines to one voltage. | 90 A at 18.5 VDC, 30% duty cycle. |
| Input voltage and plug | 120–240 V, 1-phase, 50/60 Hz. Amps input at rated output in the table: 18.8 A for 120 V DC TIG and 11.8 A for 240 V DC TIG. The 240 V DC stick row prints 16.3 A. | 120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named. |
| Wire or rod size | Not published by manufacturer | Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. |
| Weight | 54 lb. (24.5 kg), air-cooled machine only. | Not published by manufacturer |
| Material thickness | AC/DC TIG: 120 V, 20 gauge–1/8 in.; 240 V, 20 gauge–1/4 in. DC stick: 120 V, 16 gauge–3/16 in.; 240 V, 16 gauge–3/8 in. MIG spool gun: 120 V, 1/8 in.; 240 V, 1/8–3/8 in. The table does not name the metal. | Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep. |