Home CompareSyncrowave 212 vs Power MIG 215 MPi
Syncrowave 212 vs Power MIG 215 MPi
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Syncrowave 212 | Power MIG 215 MPi |
|---|---|---|
| Process | AC/DC TIG (GTAW), pulsed DC TIG (GTAW-P), DC stick (SMAW), and MIG (GMAW) with a Spoolmate 150. | MIG, flux-cored, DC stick, and DC TIG. |
| Output amp range | AC/DC TIG: 20–210 A. DC stick: 30–200 A. MIG: 30–175 A. The specifications table narrows 120 V DC TIG to 20–140 A and 240 V DC stick to 35–160 A. | 120 V: 20–140 A DC. 230 V: 20–220 A DC. Max OCV 56 V. |
| Rated duty cycle | Quick specs lead with 130 A at 15.2 V, 60% duty cycle. The table adds, at 60%: 120 V DC TIG 110 A at 14.4 V, and 240 V DC stick 120 A at 24.8 V. It also prints 210 A at 20% and 120 A at 100% on the AC/DC TIG duty column, without tying those two lines to one voltage. | 215 A / 24.8 V / 30%. The specifications table prints that one duty-cycle figure beside input power 120/230/1/60. 215 A is above the printed 120 V output range of 20–140 A. |
| Input voltage and plug | 120–240 V, 1-phase, 50/60 Hz. Amps input at rated output in the table: 18.8 A for 120 V DC TIG and 11.8 A for 240 V DC TIG. The 240 V DC stick row prints 16.3 A. | 120/230/1/60. Input current at rated output: 120 VAC, 15 A effective and 22 A max; 230 VAC, 15.9 A effective and 29 A max. |
| Wire or rod size | Not published by manufacturer | Wire feed speed 50–500 ipm (1.3–12.7 m/min). A wire-diameter range is not in the specifications table. |
| Weight | 54 lb. (24.5 kg), air-cooled machine only. | 48 lb (21.8 kg). |
| Material thickness | AC/DC TIG: 120 V, 20 gauge–1/8 in.; 240 V, 20 gauge–1/4 in. DC stick: 120 V, 16 gauge–3/16 in.; 240 V, 16 gauge–3/8 in. MIG spool gun: 120 V, 1/8 in.; 240 V, 1/8–3/8 in. The table does not name the metal. | Not published by manufacturer |
Outlet check, Syncrowave 212 · Outlet check, Power MIG 215 MPi