Syncrowave 212 vs TIG200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By the WeldFacts editorial team · Checked 2 November 2026 · How we verify

Spec	Syncrowave 212	TIG200
Process	AC/DC TIG (GTAW), pulsed DC TIG (GTAW-P), DC stick (SMAW), and MIG (GMAW) with a Spoolmate 150. Source	DC TIG and stick. Source
Output amp range	AC/DC TIG: 20–210 A. DC stick: 30–200 A. MIG: 30–175 A. The specifications table narrows 120 V DC TIG to 20–140 A and 240 V DC stick to 35–160 A. Source	On 240 V: TIG 190 A and stick 185 A. On 120 V: TIG 145 A and stick 140 A. The lower limit is 10 A for either process. Source
Rated duty cycle	Quick specs lead with 130 A at 15.2 V, 60% duty cycle. The table adds, at 60%: 120 V DC TIG 110 A at 14.4 V, and 240 V DC stick 120 A at 24.8 V. It also prints 210 A at 20% and 120 A at 100% on the AC/DC TIG duty column, without tying those two lines to one voltage. Source	Not published by manufacturer Source
Input voltage and plug	120–240 V, 1-phase, 50/60 Hz. Amps input at rated output in the table: 18.8 A for 120 V DC TIG and 11.8 A for 240 V DC TIG. The 240 V DC stick row prints 16.3 A. Source	Dual-voltage 120/240 V input. Input amperes are not in that description. Source
Wire or rod size	Not published by manufacturer Source	Not published by manufacturer Source
Weight	54 lb. (24.5 kg), air-cooled machine only. Source	Not published by manufacturer Source
Material thickness	AC/DC TIG: 120 V, 20 gauge–1/8 in.; 240 V, 20 gauge–1/4 in. DC stick: 120 V, 16 gauge–3/16 in.; 240 V, 16 gauge–3/8 in. MIG spool gun: 120 V, 1/8 in.; 240 V, 1/8–3/8 in. The table does not name the metal. Source	7/16-inch steel in a single pass is tied to the 190 A, 240 V TIG sentence. The 10 A floor is described as mild enough for 24-gauge sheet metal. A 120 V thickness is not printed. Source

Outlet check, Syncrowave 212 · Outlet check, TIG200