Thunderbolt 210 MV vs Handler 140EZ

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Thunderbolt 210 MV	Handler 140EZ
Process	Stick (SMAW). Source	MIG and flux-cored. The included drive roll has grooves for solid wire and flux-cored wire, and the machine includes a gas solenoid and regulator. Source
Output amp range	120 V: 10–110 A. 240 V: 10–210 A. Source	30–140 A. Source
Rated duty cycle	120 V: 65 A at 60% duty cycle and 50 A at 100% duty cycle. 240 V: 135 A at 60% duty cycle and 105 A at 100% duty cycle. Source	90 A at 18.5 VDC, 30% duty cycle. Source
Input voltage and plug	1-phase power, 120 V or 240 V, 50/60 Hz. Maximum amps input at rated load output: 27.8 A at 120 V and 44.9 A at 240 V. The cord includes multi-voltage plugs for 120 V and 240 V. Source	120-volt power. Amps input at rated output, 60 Hz, 115 V column: 20 A. A power cord with plug is included. The plug type is not named. Source
Wire or rod size	Not published by manufacturer Source	Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Source
Weight	13 lb. Source	Not published by manufacturer Source
Material thickness	Maximum mild steel thickness: 120 V, 1/8 in. 240 V, 1/2 in. Source	Mild steel thickness range 24 ga.–3/16 in., described as a single pass, with thicker material by multiple passes and prep. Source