WeldFactsSheet numbers only

Home CompareThunderbolt 210 MV vs Handler 210i

Thunderbolt 210 MV vs Handler 210i

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By · Checked · How we verify

Spec Thunderbolt 210 MV Handler 210i
Process Stick (SMAW).
Source
 MIG and flux-cored. The included drive roll covers solid and flux-cored wire, and spool-gun circuitry is described for aluminum wire.
Source
Output amp range 120 V: 10–110 A. 240 V: 10–210 A.
Source
 120 V: 30–140 A. 240 V: 30–210 A.
Source
Rated duty cycle 120 V: 65 A at 60% duty cycle and 50 A at 100% duty cycle. 240 V: 135 A at 60% duty cycle and 105 A at 100% duty cycle.
Source
 120 V, 15 A: 45 A at 16.3 VDC, 100% duty cycle. 120 V, 20 A: 90 A at 18.5 VDC, 25% duty cycle, and 60 A at 17.0 VDC, 100% duty cycle. 240 V: 210 A at 24.5 VDC, 25% duty cycle, and 105 A at 19.3 VDC, 100% duty cycle.
Source
Input voltage and plug 1-phase power, 120 V or 240 V, 50/60 Hz. Maximum amps input at rated load output: 27.8 A at 120 V and 44.9 A at 240 V. The cord includes multi-voltage plugs for 120 V and 240 V.
Source
 120 V or 240 V, 50/60 Hz, with an included adapter for both. Amps input at rated output: 13.8 A on the 120 V, 15 A row; 27.6 A on the 120 V, 20 A row; 44.3 A on 240 V.
Source
Wire or rod size Not published by manufacturer
Source
 Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire.
Source
Weight 13 lb.
Source
 26 lb. The sheet says the machine weighs only 26 pounds.
Source
Material thickness Maximum mild steel thickness: 120 V, 1/8 in. 240 V, 1/2 in.
Source
 Mild steel thickness range 24 ga.–3/8 in., in a single pass, with thicker material by multiple passes.
Source

Outlet check, Thunderbolt 210 MV · Outlet check, Handler 210i