WeldFactsSheet numbers only

Home CompareThunderbolt 210 MV vs Multi-Handler 200

Thunderbolt 210 MV vs Multi-Handler 200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

By · Checked · How we verify

Spec Thunderbolt 210 MV Multi-Handler 200
Process Stick (SMAW).
Source
 MIG, flux-cored, DC TIG, and stick.
Source
Output amp range 120 V: 10–110 A. 240 V: 10–210 A.
Source
 MIG/flux-cored: 30–200 A. DC TIG: 20–200 A. Stick: 30–200 A. The table narrows 120 V MIG to 30–120 A, 120 V TIG to 20–140 A, and 120 V stick to 30–100 A.
Source
Rated duty cycle 120 V: 65 A at 60% duty cycle and 50 A at 100% duty cycle. 240 V: 135 A at 60% duty cycle and 105 A at 100% duty cycle.
Source
 At 30% duty cycle: MIG 110 A at 19.5 V on 120 V and 165 A at 22.2 V on 240 V; DC TIG 105 A at 14.2 V on 120 V and 165 A at 16.6 V on 240 V; stick 90 A at 23.6 V on 120 V and 140 A at 25.6 V on 240 V.
Source
Input voltage and plug 1-phase power, 120 V or 240 V, 50/60 Hz. Maximum amps input at rated load output: 27.8 A at 120 V and 44.9 A at 240 V. The cord includes multi-voltage plugs for 120 V and 240 V.
Source
 120 V or 240 V, 50/60 Hz. MVP plugs: 5-15P (120 V, 15 A) and 6-50P (240 V, 50 A). Amps input at rated output, MIG: 23.0 A at 120 V and 19.0 A at 240 V. DC TIG: 16.7 A and 14.7 A. Stick: 22.0 A and 17.9 A.
Source
Wire or rod size Not published by manufacturer
Source
 Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. Wire feed speed on the product page is 60–650 ipm.
Source
Weight 13 lb.
Source
 38.4 lb on the product page. The spec sheet says the machine weighs under 39 pounds.
Source
Material thickness Maximum mild steel thickness: 120 V, 1/8 in. 240 V, 1/2 in.
Source
 Mild steel: MIG/flux-cored 24 ga.–3/8 in., DC TIG 22 ga.–3/16 in., stick 16 ga.–3/8 in.
Source

Outlet check, Thunderbolt 210 MV · Outlet check, Multi-Handler 200