Thunderbolt 210 MV vs TIG200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Thunderbolt 210 MV	TIG200
Process	Stick (SMAW). Source	DC TIG and stick. Source
Output amp range	120 V: 10–110 A. 240 V: 10–210 A. Source	On 240 V: TIG 190 A and stick 185 A. On 120 V: TIG 145 A and stick 140 A. The lower limit is 10 A for either process. Source
Rated duty cycle	120 V: 65 A at 60% duty cycle and 50 A at 100% duty cycle. 240 V: 135 A at 60% duty cycle and 105 A at 100% duty cycle. Source	Not published by manufacturer Source
Input voltage and plug	1-phase power, 120 V or 240 V, 50/60 Hz. Maximum amps input at rated load output: 27.8 A at 120 V and 44.9 A at 240 V. The cord includes multi-voltage plugs for 120 V and 240 V. Source	Dual-voltage 120/240 V input. Input amperes are not in that description. Source
Wire or rod size	Not published by manufacturer Source	Not published by manufacturer Source
Weight	13 lb. Source	Not published by manufacturer Source
Material thickness	Maximum mild steel thickness: 120 V, 1/8 in. 240 V, 1/2 in. Source	7/16-inch steel in a single pass is tied to the 190 A, 240 V TIG sentence. The 10 A floor is described as mild enough for 24-gauge sheet metal. A 120 V thickness is not printed. Source