TIG225X vs TIG200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	TIG225X	TIG200
Process	AC/DC TIG and stick. The page tells the operator to use AC for aluminum and magnesium and DC for steel, stainless, and most other metals. Source	DC TIG and stick. Source
Output amp range	TIG 10–225 A. Stick 10–180 A. Source	On 240 V: TIG 190 A and stick 185 A. On 120 V: TIG 145 A and stick 140 A. The lower limit is 10 A for either process. Source
Rated duty cycle	TIG: 40% at max output, and 100% at 108 A on 120 V or 155 A on 240 V. Stick: 40% at max output, and 100% at 76 A on 120 V or 139 A on 240 V. Source	Not published by manufacturer Source
Input voltage and plug	120 V / 240 V, single-phase, 50/60 Hz. Input amperes and a plug name are not in the specifications list. Source	Dual-voltage 120/240 V input. Input amperes are not in that description. Source
Wire or rod size	Not published by manufacturer Source	Not published by manufacturer Source
Weight	41 lb (18.5 kg). Source	Not published by manufacturer Source
Material thickness	The page says it can weld materials up to 1/2 inch thick. Source	7/16-inch steel in a single pass is tied to the 190 A, 240 V TIG sentence. The 10 A floor is described as mild enough for 24-gauge sheet metal. A 120 V thickness is not printed. Source