TIG230 vs MIG285
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | TIG230 | MIG285 |
|---|---|---|
| Process | AC/DC TIG and stick. The page lists nine AC waveforms, including square, sine, triangle, and hybrid. | The specifications table says output type MIG, lift TIG, and stick. The overview also names flux core. |
| Output amp range | TIG 2–230 A. Stick 10–200 A. | Max rated output: MIG 285 A, TIG 250 A, stick 250 A. The duty table prints MIG 285 A on 240 V and 120 A on 120 V, and stick and TIG 250 A on 240 V and 120 A on 120 V. |
| Rated duty cycle | TIG: 35% at 230 A, 60% at 175 A, 100% at 136 A. Stick: 35% at 200 A, 60% at 152 A, 100% at 118 A. The duty lines are not split by voltage. | MIG: 30% at 285 A on 240 V and 30% at 120 A on 120 V. Stick: 30% at 250 A on 240 V and 30% at 120 A on 120 V. TIG: 30% at 250 A on 240 V and 30% at 120 A on 120 V. |
| Input voltage and plug | 90–275 V, 50–60 Hz. That range covers a 120 V outlet and a 240 V outlet. Input amperes are not in the specifications block. | 1-phase, 120 V/240 V. Max inrush (I1max), columns MIG / stick / TIG: 120 V 34.2 / 42.5 / 25.3 A, and 240 V 57.4 / 53.5 / 35.7 A. Max rated (I1eff): 120 V 18.7 / 23.3 / 13.9 A, and 240 V 27.4 / 29.3 / 19.6 A. |
| Wire or rod size | Not published by manufacturer | Not published by manufacturer |
| Weight | 46 lb. Dimensions 22 in. long, 8 in. wide, 16 in. high. | The page says “weighing under 60 lbs.” It does not print a single net-weight number. |
| Material thickness | Not published by manufacturer | The overview says the 285 A output can weld materials up to 5/8 inch thick. |