TIG230 vs TIG200

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	TIG230	TIG200
Process	AC/DC TIG and stick. The page lists nine AC waveforms, including square, sine, triangle, and hybrid. Source	DC TIG and stick. Source
Output amp range	TIG 2–230 A. Stick 10–200 A. Source	On 240 V: TIG 190 A and stick 185 A. On 120 V: TIG 145 A and stick 140 A. The lower limit is 10 A for either process. Source
Rated duty cycle	TIG: 35% at 230 A, 60% at 175 A, 100% at 136 A. Stick: 35% at 200 A, 60% at 152 A, 100% at 118 A. The duty lines are not split by voltage. Source	Not published by manufacturer Source
Input voltage and plug	90–275 V, 50–60 Hz. That range covers a 120 V outlet and a 240 V outlet. Input amperes are not in the specifications block. Source	Dual-voltage 120/240 V input. Input amperes are not in that description. Source
Wire or rod size	Not published by manufacturer Source	Not published by manufacturer Source
Weight	46 lb. Dimensions 22 in. long, 8 in. wide, 16 in. high. Source	Not published by manufacturer Source
Material thickness	Not published by manufacturer Source	7/16-inch steel in a single pass is tied to the 190 A, 240 V TIG sentence. The 10 A floor is described as mild enough for 24-gauge sheet metal. A 120 V thickness is not printed. Source