TIG325X vs MIG285
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | TIG325X | MIG285 |
|---|---|---|
| Process | AC/DC TIG and stick. The output line splits TIG into 5–325 A DC and 10–325 A AC. | The specifications table says output type MIG, lift TIG, and stick. The overview also names flux core. |
| Output amp range | TIG 10–325 A (5–325 A DC, 10–325 A AC). Stick 20–250 A. | Max rated output: MIG 285 A, TIG 250 A, stick 250 A. The duty table prints MIG 285 A on 240 V and 120 A on 120 V, and stick and TIG 250 A on 240 V and 120 A on 120 V. |
| Rated duty cycle | TIG: 40% at 325 A, 60% at 280 A, 100% at 250 A. Stick: 40% at 250 A, 60% at 220 A, 100% at 180 A. The duty lines are not split by voltage. | MIG: 30% at 285 A on 240 V and 30% at 120 A on 120 V. Stick: 30% at 250 A on 240 V and 30% at 120 A on 120 V. TIG: 30% at 250 A on 240 V and 30% at 120 A on 120 V. |
| Input voltage and plug | 120 V / 240 V, single-phase, 50/60 Hz. Input amperes are not in the specifications list. | 1-phase, 120 V/240 V. Max inrush (I1max), columns MIG / stick / TIG: 120 V 34.2 / 42.5 / 25.3 A, and 240 V 57.4 / 53.5 / 35.7 A. Max rated (I1eff): 120 V 18.7 / 23.3 / 13.9 A, and 240 V 27.4 / 29.3 / 19.6 A. |
| Wire or rod size | Not published by manufacturer | Not published by manufacturer |
| Weight | 73.24 lb (about 33.2 kg). | The page says “weighing under 60 lbs.” It does not print a single net-weight number. |
| Material thickness | Not published by manufacturer | The overview says the 285 A output can weld materials up to 5/8 inch thick. |