Miller · 907840
Multimatic 215 PRO
Dual-voltage multi-process welder. Miller publishes MIG, flux-cored, DC TIG, and DC stick, with 215 A at 30% duty cycle on 240 V.
Specifications
Values are copied from the cited page. They are not estimated from another model or from a review.
| Spec | Published value | Source, checked 2 November 2026 |
|---|---|---|
| Process | MIG (GMAW), pulsed MIG (GMAW-P), flux-cored (FCAW), DC TIG (GTAW), pulsed TIG (GTAW-P), and DC stick (SMAW). | Quick specs, Processes |
| Output amp range | 20–230 A on the product page. | Product page specifications, Amperage Range |
| Rated duty cycle | 120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle, and 215 A at 24.8 VDC, 30% duty cycle. | Quick specs, Rated Output |
| Input voltage and plug | 120 or 240 V, single-phase, 50/60 Hz. MVP plugs for 120 V and 240 V are included. Input amperes are not in the quick specs. | Quick specs, Input Power, and the included-cord line |
| Wire or rod size | The features page says the machine is used with .024–.035 in. (0.6–0.9 mm) solid wire and .030–.045 in. (0.8–1.2 mm) flux-cored wire. The included drive roll is grooved for .024 in. or .030/.035 in. solid and .030/.035 in. flux-cored. | Features, wire sentence, and Comes complete with |
| Weight | 35 lb. | Quick-spec weight callout |
| Material thickness | 120 V: 24 ga.–3/16 in. steel and 18 ga.–1/8 in. aluminum. 240 V: 24 ga.–3/8 in. steel and 18 ga.–3/8 in. aluminum. Stick and TIG thickness are not printed in that block. | Quick specs, Weld Thickness |
Notes from the source
- TIG on this sheet is DC. The sheet does not call it AC TIG.
Manufacturer page · Check this model against an outlet · 120 V list · 240 V list · Miller models
Questions the table can answer
What output does the Multimatic 215 PRO publish?
20–230 A on the product page. Source: https://www.millerwelds.com/en-us/equipment/welders/multiprocess/multimatic/multimatic-215-pro-m30091/multimatic-215-pro-907840
What duty cycle does the Multimatic 215 PRO publish?
120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle, and 215 A at 24.8 VDC, 30% duty cycle. Source: https://contenthub.itwwelding.com/api/public/content/miller-electric-mfg-llc/spec-sheet/PIM/4b92ec-dc13-5.pdf
What input does the Multimatic 215 PRO publish?
120 or 240 V, single-phase, 50/60 Hz. MVP plugs for 120 V and 240 V are included. Input amperes are not in the quick specs.
Which processes does the Multimatic 215 PRO publish?
MIG, flux-cored, stick, TIG.