ESAB
0558012702
Rebel EMP 235ic
40% · 4.0 min on · 6.0 min off · 120 A
First percent on the sheet for this voltage. At 104°F (40°C): MIG 120 A / 19 V at 40% on 120 V and 235 A / 26 V at 40% on 230 V.
40% · 4.0 min on · 6.0 min off · 120 A
First percent on the sheet for this voltage. At 104°F (40°C): MIG 120 A / 19 V at 40% on 120 V and 235 A / 26 V at 40% on 230 V.
Sheet
Copied from the cited page. Not taken from another model or a review.
| Spec | Published value | Source, checked 2 November 2026 |
|---|---|---|
| Process | MIG, TIG, and stick. The wire table includes flux-cored diameters in the ordering copy: up to .052 in. cored wire. | Brochure introduction and the wire-diameter table |
| Output amp range | Current range 5–150 A on 120 V and 5–250 A on 230 V. Maximum output 250 A / 30 V. | Specifications, current range and maximum output |
| Rated duty cycle | At 104°F (40°C): MIG 120 A / 19 V at 40% on 120 V and 235 A / 26 V at 40% on 230 V. Stick 90 A / 23.6 V at 40% on 120 V and 210 A / 28.4 V at 25% on 230 V. TIG 130 A / 15.2 V at 40% on 120 V and 240 A / 19.6 V at 40% on 230 V. | Specifications, welding output |
| Input voltage and plug | Primary voltage 120 VAC and 208/230 VAC, 1-phase, 50/60 Hz. Supply range 90–270 VAC. Supply plug 230 V, NEMA 6-50P. A separate accessory is a 230 V to 120 V, 15 A power adapter (W4014000). Input amperes are not in the specifications table. | Specifications and the accessories list |
| Wire or rod size | Mild steel .023–.035 in. (0.6–0.9 mm). Stainless .030–.035 in. (0.8–0.9 mm). Aluminum .030–.045 in. (0.8–1.2 mm). The introduction also says up to .045 in. solid wire, up to .052 in. cored wire, rods up to 5/32 in., and TIG rods up to 3/16 in. Spools 4, 8, and 12 in. | Specifications, wire diameter, and the introduction |
| Weight | Specifications table: 63 lb (28.6 kg). The same brochure’s introduction says “weighing in at 53 lbs. (24 kg).” | Specifications, power source weight, and the introduction |
| Material thickness | Maximum plate thickness 1/2 in. (12.7 mm). | Specifications, maximum plate thickness |
Notes on the source
- The job check uses the 63 lb specifications-table weight. The 53 lb sentence is kept in the weight cell because it is on the same brochure.
Manufacturer page · Job check · ESAB
From the table
What output does the Rebel EMP 235ic publish?
Current range 5–150 A on 120 V and 5–250 A on 230 V. Maximum output 250 A / 30 V. Source: https://assets.esab.com/assetbank-esab/assetfile/21203
What duty cycle does the Rebel EMP 235ic publish?
At 104°F (40°C): MIG 120 A / 19 V at 40% on 120 V and 235 A / 26 V at 40% on 230 V. Stick 90 A / 23.6 V at 40% on 120 V and 210 A / 28.4 V at 25% on 230 V. TIG 130 A / 15.2 V at 40% on 120 V and 240 A / 19.6 V at 40% on 230 V. Source: https://assets.esab.com/assetbank-esab/assetfile/21203
What input does the Rebel EMP 235ic publish?
Primary voltage 120 VAC and 208/230 VAC, 1-phase, 50/60 Hz. Supply range 90–270 VAC. Supply plug 230 V, NEMA 6-50P. A separate accessory is a 230 V to 120 V, 15 A power adapter (W4014000). Input amperes are not in the specifications table.
Which processes does the Rebel EMP 235ic publish?
MIG, flux-cored, stick, TIG.