Home CompareHandler 210MVP vs Rebel EMP 235ic
Handler 210MVP vs Rebel EMP 235ic
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Handler 210MVP | Rebel EMP 235ic |
|---|---|---|
| Process | MIG and flux-cored. Spool-gun circuitry is described for aluminum wire. A gas solenoid and regulator are included. | MIG, TIG, and stick. The wire table includes flux-cored diameters in the ordering copy: up to .052 in. cored wire. |
| Output amp range | 115 V: 25–140 A. 230 V: 25–210 A. | Current range 5–150 A on 120 V and 5–250 A on 230 V. Maximum output 250 A / 30 V. |
| Rated duty cycle | 115 V: 90 A at 19 VDC, 20% duty cycle. 230 V: 150 A at 23 VDC, 30% duty cycle. | At 104°F (40°C): MIG 120 A / 19 V at 40% on 120 V and 235 A / 26 V at 40% on 230 V. Stick 90 A / 23.6 V at 40% on 120 V and 210 A / 28.4 V at 25% on 230 V. TIG 130 A / 15.2 V at 40% on 120 V and 240 A / 19.6 V at 40% on 230 V. |
| Input voltage and plug | 115 V or 230 V, 60 Hz. Amps input at rated output: 20 A at 115 V and 24 A at 230 V. The cord includes 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) MVP plugs. | Primary voltage 120 VAC and 208/230 VAC, 1-phase, 50/60 Hz. Supply range 90–270 VAC. Supply plug 230 V, NEMA 6-50P. A separate accessory is a 230 V to 120 V, 15 A power adapter (W4014000). Input amperes are not in the specifications table. |
| Wire or rod size | Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. | Mild steel .023–.035 in. (0.6–0.9 mm). Stainless .030–.035 in. (0.8–0.9 mm). Aluminum .030–.045 in. (0.8–1.2 mm). The introduction also says up to .045 in. solid wire, up to .052 in. cored wire, rods up to 5/32 in., and TIG rods up to 3/16 in. Spools 4, 8, and 12 in. |
| Weight | 79 lb. (35.8 kg). | Specifications table: 63 lb (28.6 kg). The same brochure’s introduction says “weighing in at 53 lbs. (24 kg).” |
| Material thickness | Mild steel thickness range 24 ga.–3/8 in., in a single pass. The sheet says thicker material is run with multiple passes and does not print that second maximum. | Maximum plate thickness 1/2 in. (12.7 mm). |
Outlet check, Handler 210MVP · Outlet check, Rebel EMP 235ic