Home CompareMillermatic 211 PRO vs Rebel EMP 235ic
Millermatic 211 PRO vs Rebel EMP 235ic
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Millermatic 211 PRO | Rebel EMP 235ic |
|---|---|---|
| Process | MIG (GMAW), pulsed MIG (GMAW-P), and flux-cored (FCAW). | MIG, TIG, and stick. The wire table includes flux-cored diameters in the ordering copy: up to .052 in. cored wire. |
| Output amp range | 30–230 A on the product page. The spec sheet does not print a separate amp range by voltage. | Current range 5–150 A on 120 V and 5–250 A on 230 V. Maximum output 250 A / 30 V. |
| Rated duty cycle | 120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle. | At 104°F (40°C): MIG 120 A / 19 V at 40% on 120 V and 235 A / 26 V at 40% on 230 V. Stick 90 A / 23.6 V at 40% on 120 V and 210 A / 28.4 V at 25% on 230 V. TIG 130 A / 15.2 V at 40% on 120 V and 240 A / 19.6 V at 40% on 230 V. |
| Input voltage and plug | 120 V: 27.0 A, single-phase, 50/60 Hz. 240 V: 28.9 A, single-phase, 50/60 Hz. The sheet says the cord uses MVP plugs for 120 V and 240 V and does not name a breaker size. | Primary voltage 120 VAC and 208/230 VAC, 1-phase, 50/60 Hz. Supply range 90–270 VAC. Supply plug 230 V, NEMA 6-50P. A separate accessory is a 230 V to 120 V, 15 A power adapter (W4014000). Input amperes are not in the specifications table. |
| Wire or rod size | Included Quick Select drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire. | Mild steel .023–.035 in. (0.6–0.9 mm). Stainless .030–.035 in. (0.8–0.9 mm). Aluminum .030–.045 in. (0.8–1.2 mm). The introduction also says up to .045 in. solid wire, up to .052 in. cored wire, rods up to 5/32 in., and TIG rods up to 3/16 in. Spools 4, 8, and 12 in. |
| Weight | 35 lb. | Specifications table: 63 lb (28.6 kg). The same brochure’s introduction says “weighing in at 53 lbs. (24 kg).” |
| Material thickness | 120 V: 24 ga.–3/16 in. steel and 18 ga.–1/8 in. aluminum. 240 V: 24 ga.–3/8 in. steel and 18 ga.–3/8 in. aluminum. | Maximum plate thickness 1/2 in. (12.7 mm). |
Outlet check, Millermatic 211 PRO · Outlet check, Rebel EMP 235ic