Multimatic 215 PRO vs Thunderbolt 210 MV

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Multimatic 215 PRO	Thunderbolt 210 MV
Process	MIG (GMAW), pulsed MIG (GMAW-P), flux-cored (FCAW), DC TIG (GTAW), pulsed TIG (GTAW-P), and DC stick (SMAW). Source	Stick (SMAW). Source
Output amp range	20–230 A on the product page. Source	120 V: 10–110 A. 240 V: 10–210 A. Source
Rated duty cycle	120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle, and 215 A at 24.8 VDC, 30% duty cycle. Source	120 V: 65 A at 60% duty cycle and 50 A at 100% duty cycle. 240 V: 135 A at 60% duty cycle and 105 A at 100% duty cycle. Source
Input voltage and plug	120 or 240 V, single-phase, 50/60 Hz. MVP plugs for 120 V and 240 V are included. Input amperes are not in the quick specs. Source	1-phase power, 120 V or 240 V, 50/60 Hz. Maximum amps input at rated load output: 27.8 A at 120 V and 44.9 A at 240 V. The cord includes multi-voltage plugs for 120 V and 240 V. Source
Wire or rod size	The features page says the machine is used with .024–.035 in. (0.6–0.9 mm) solid wire and .030–.045 in. (0.8–1.2 mm) flux-cored wire. The included drive roll is grooved for .024 in. or .030/.035 in. solid and .030/.035 in. flux-cored. Source	Not published by manufacturer Source
Weight	35 lb. Source	13 lb. Source
Material thickness	120 V: 24 ga.–3/16 in. steel and 18 ga.–1/8 in. aluminum. 240 V: 24 ga.–3/8 in. steel and 18 ga.–3/8 in. aluminum. Stick and TIG thickness are not printed in that block. Source	Maximum mild steel thickness: 120 V, 1/8 in. 240 V, 1/2 in. Source