Multimatic 215 PRO vs TIG325X

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Multimatic 215 PRO	TIG325X
Process	MIG (GMAW), pulsed MIG (GMAW-P), flux-cored (FCAW), DC TIG (GTAW), pulsed TIG (GTAW-P), and DC stick (SMAW). Source	AC/DC TIG and stick. The output line splits TIG into 5–325 A DC and 10–325 A AC. Source
Output amp range	20–230 A on the product page. Source	TIG 10–325 A (5–325 A DC, 10–325 A AC). Stick 20–250 A. Source
Rated duty cycle	120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle, and 215 A at 24.8 VDC, 30% duty cycle. Source	TIG: 40% at 325 A, 60% at 280 A, 100% at 250 A. Stick: 40% at 250 A, 60% at 220 A, 100% at 180 A. The duty lines are not split by voltage. Source
Input voltage and plug	120 or 240 V, single-phase, 50/60 Hz. MVP plugs for 120 V and 240 V are included. Input amperes are not in the quick specs. Source	120 V / 240 V, single-phase, 50/60 Hz. Input amperes are not in the specifications list. Source
Wire or rod size	The features page says the machine is used with .024–.035 in. (0.6–0.9 mm) solid wire and .030–.045 in. (0.8–1.2 mm) flux-cored wire. The included drive roll is grooved for .024 in. or .030/.035 in. solid and .030/.035 in. flux-cored. Source	Not published by manufacturer Source
Weight	35 lb. Source	73.24 lb (about 33.2 kg). Source
Material thickness	120 V: 24 ga.–3/16 in. steel and 18 ga.–1/8 in. aluminum. 240 V: 24 ga.–3/8 in. steel and 18 ga.–3/8 in. aluminum. Stick and TIG thickness are not printed in that block. Source	Not published by manufacturer Source