Multimatic 215 PRO vs Unlimited 140

Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.

Spec	Multimatic 215 PRO	Unlimited 140
Process	MIG (GMAW), pulsed MIG (GMAW-P), flux-cored (FCAW), DC TIG (GTAW), pulsed TIG (GTAW-P), and DC stick (SMAW). Source	GMAW/FCAW, SMAW, and GTAW. Source
Output amp range	20–230 A on the product page. Source	GMAW/FCAW 30–140 A. SMAW 30–75 A. GTAW 20–110 A. Source
Rated duty cycle	120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle, and 215 A at 24.8 VDC, 30% duty cycle. Source	GMAW/FCAW 30% at 90 A. SMAW 40% at 75 A. GTAW 20% at 110 A. Source
Input voltage and plug	120 or 240 V, single-phase, 50/60 Hz. MVP plugs for 120 V and 240 V are included. Input amperes are not in the quick specs. Source	120 VAC / 60 Hz. Current input: GMAW/FCAW 21 A, SMAW 21.3 A, GTAW 20.5 A. Source
Wire or rod size	The features page says the machine is used with .024–.035 in. (0.6–0.9 mm) solid wire and .030–.045 in. (0.8–1.2 mm) flux-cored wire. The included drive roll is grooved for .024 in. or .030/.035 in. solid and .030/.035 in. flux-cored. Source	Solid core .025 / .030 / .035 in. Flux-cored .030 / .035 in. Wire speed 80–275 IPM. Spool capacity up to 12 lb. Source
Weight	35 lb. Source	Not published by manufacturer Source
Material thickness	120 V: 24 ga.–3/16 in. steel and 18 ga.–1/8 in. aluminum. 240 V: 24 ga.–3/8 in. steel and 18 ga.–3/8 in. aluminum. Stick and TIG thickness are not printed in that block. Source	Not published by manufacturer Source