Home CompareMultimatic 215 PRO vs Unlimited 200
Multimatic 215 PRO vs Unlimited 200
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Multimatic 215 PRO | Unlimited 200 |
|---|---|---|
| Process | MIG (GMAW), pulsed MIG (GMAW-P), flux-cored (FCAW), DC TIG (GTAW), pulsed TIG (GTAW-P), and DC stick (SMAW). | GMAW/FCAW, SMAW, and GTAW. |
| Output amp range | 20–230 A on the product page. | 120 V: GMAW/FCAW 30–140 A, SMAW 15–70 A, GTAW 15–90 A. 240 V: GMAW/FCAW 30–200 A, SMAW 15–170 A, GTAW 15–200 A. |
| Rated duty cycle | 120 V: 110 A at 19.5 VDC, 60% duty cycle. 240 V: 160 A at 22.0 VDC, 60% duty cycle, and 215 A at 24.8 VDC, 30% duty cycle. | 120 V: GMAW/FCAW 40% at 90 A, SMAW 40% at 70 A, GTAW 40% at 90 A. 240 V: GMAW/FCAW 15% at 200 A, SMAW 15% at 170 A, GTAW 15% at 200 A. |
| Input voltage and plug | 120 or 240 V, single-phase, 50/60 Hz. MVP plugs for 120 V and 240 V are included. Input amperes are not in the quick specs. | 120/240 VAC, 60 Hz. Current input at 120 V: GMAW/FCAW 23 A, SMAW 22 A, GTAW 18 A. At 240 V: 32 A, 31 A, and 26 A. |
| Wire or rod size | The features page says the machine is used with .024–.035 in. (0.6–0.9 mm) solid wire and .030–.045 in. (0.8–1.2 mm) flux-cored wire. The included drive roll is grooved for .024 in. or .030/.035 in. solid and .030/.035 in. flux-cored. | Solid core .025 / .030 / .035 in. Flux-cored .030 / .035 in. Wire speed 80–400 IPM. Spool capacity up to 12 lb. |
| Weight | 35 lb. | Not published by manufacturer |
| Material thickness | 120 V: 24 ga.–3/16 in. steel and 18 ga.–1/8 in. aluminum. 240 V: 24 ga.–3/8 in. steel and 18 ga.–3/8 in. aluminum. Stick and TIG thickness are not printed in that block. | Not published by manufacturer |
Outlet check, Multimatic 215 PRO · Outlet check, Unlimited 200