Home CompareMultimatic 235 vs Rebel EMP 235ic
Multimatic 235 vs Rebel EMP 235ic
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Multimatic 235 | Rebel EMP 235ic |
|---|---|---|
| Process | MIG (GMAW), flux-cored (FCAW), DC stick (SMAW), DC Lift-Arc TIG (GTAW), and pulsed TIG (GTAW-P). | MIG, TIG, and stick. The wire table includes flux-cored diameters in the ordering copy: up to .052 in. cored wire. |
| Output amp range | 20–235 A. | Current range 5–150 A on 120 V and 5–250 A on 230 V. Maximum output 250 A / 30 V. |
| Rated duty cycle | MIG: 170 A at 22.5 V, 60% duty cycle. Stick: 150 A at 26 V, 60% duty cycle. TIG: 180 A at 17.2 V, 60% duty cycle. | At 104°F (40°C): MIG 120 A / 19 V at 40% on 120 V and 235 A / 26 V at 40% on 230 V. Stick 90 A / 23.6 V at 40% on 120 V and 210 A / 28.4 V at 25% on 230 V. TIG 130 A / 15.2 V at 40% on 120 V and 240 A / 19.6 V at 40% on 230 V. |
| Input voltage and plug | 240 V, single-phase. Input amperes are not in the quick specs. | Primary voltage 120 VAC and 208/230 VAC, 1-phase, 50/60 Hz. Supply range 90–270 VAC. Supply plug 230 V, NEMA 6-50P. A separate accessory is a 230 V to 120 V, 15 A power adapter (W4014000). Input amperes are not in the specifications table. |
| Wire or rod size | Not published by manufacturer | Mild steel .023–.035 in. (0.6–0.9 mm). Stainless .030–.035 in. (0.8–0.9 mm). Aluminum .030–.045 in. (0.8–1.2 mm). The introduction also says up to .045 in. solid wire, up to .052 in. cored wire, rods up to 5/32 in., and TIG rods up to 3/16 in. Spools 4, 8, and 12 in. |
| Weight | Machine only: 63 lb. (29 kg). Machine with running gear: 127 lb. (58 kg). | Specifications table: 63 lb (28.6 kg). The same brochure’s introduction says “weighing in at 53 lbs. (24 kg).” |
| Material thickness | Not published by manufacturer | Maximum plate thickness 1/2 in. (12.7 mm). |
Outlet check, Multimatic 235 · Outlet check, Rebel EMP 235ic