Home ComparePower MIG 210 MP vs Rebel EMP 235ic
Power MIG 210 MP vs Rebel EMP 235ic
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Power MIG 210 MP | Rebel EMP 235ic |
|---|---|---|
| Process | MIG, stick, TIG, and flux-cored. The rated-output column is labeled MIG. | MIG, TIG, and stick. The wire table includes flux-cored diameters in the ordering copy: up to .052 in. cored wire. |
| Output amp range | 120 V: 20–140 A DC, max OCV 56. 230 V: 20–220 A DC, max OCV 56. Wire feed speed 50–500 ipm (1.3–12.7 m/min). | Current range 5–150 A on 120 V and 5–250 A on 230 V. Maximum output 250 A / 30 V. |
| Rated duty cycle | MIG: 120 V, 100 A / 19.0 V / 40%. 230 V, 200 A / 24 V / 25%. | At 104°F (40°C): MIG 120 A / 19 V at 40% on 120 V and 235 A / 26 V at 40% on 230 V. Stick 90 A / 23.6 V at 40% on 120 V and 210 A / 28.4 V at 25% on 230 V. TIG 130 A / 15.2 V at 40% on 120 V and 240 A / 19.6 V at 40% on 230 V. |
| Input voltage and plug | 120/1/60 and 230/1/60. Effective input current at rated output: 15 A at 120 V and 14.7 A at 230 V. 120 V and 230 V input cables are included with K3963-1. | Primary voltage 120 VAC and 208/230 VAC, 1-phase, 50/60 Hz. Supply range 90–270 VAC. Supply plug 230 V, NEMA 6-50P. A separate accessory is a 230 V to 120 V, 15 A power adapter (W4014000). Input amperes are not in the specifications table. |
| Wire or rod size | Included drive rolls are 0.025–0.030 in. (0.6–0.8 mm) and 0.035 in. (0.9 mm), plus 0.030–0.045 in. (0.8–1.1 mm) knurled drive rolls. The specifications table itself does not print a wire-capacity range. | Mild steel .023–.035 in. (0.6–0.9 mm). Stainless .030–.035 in. (0.8–0.9 mm). Aluminum .030–.045 in. (0.8–1.2 mm). The introduction also says up to .045 in. solid wire, up to .052 in. cored wire, rods up to 5/32 in., and TIG rods up to 3/16 in. Spools 4, 8, and 12 in. |
| Weight | 40 lb (18 kg). | Specifications table: 63 lb (28.6 kg). The same brochure’s introduction says “weighing in at 53 lbs. (24 kg).” |
| Material thickness | Not published by manufacturer | Maximum plate thickness 1/2 in. (12.7 mm). |
Outlet check, Power MIG 210 MP · Outlet check, Rebel EMP 235ic