Home CompareRebel EMP 235ic vs TIG225X
Rebel EMP 235ic vs TIG225X
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Rebel EMP 235ic | TIG225X |
|---|---|---|
| Process | MIG, TIG, and stick. The wire table includes flux-cored diameters in the ordering copy: up to .052 in. cored wire. | AC/DC TIG and stick. The page tells the operator to use AC for aluminum and magnesium and DC for steel, stainless, and most other metals. |
| Output amp range | Current range 5–150 A on 120 V and 5–250 A on 230 V. Maximum output 250 A / 30 V. | TIG 10–225 A. Stick 10–180 A. |
| Rated duty cycle | At 104°F (40°C): MIG 120 A / 19 V at 40% on 120 V and 235 A / 26 V at 40% on 230 V. Stick 90 A / 23.6 V at 40% on 120 V and 210 A / 28.4 V at 25% on 230 V. TIG 130 A / 15.2 V at 40% on 120 V and 240 A / 19.6 V at 40% on 230 V. | TIG: 40% at max output, and 100% at 108 A on 120 V or 155 A on 240 V. Stick: 40% at max output, and 100% at 76 A on 120 V or 139 A on 240 V. |
| Input voltage and plug | Primary voltage 120 VAC and 208/230 VAC, 1-phase, 50/60 Hz. Supply range 90–270 VAC. Supply plug 230 V, NEMA 6-50P. A separate accessory is a 230 V to 120 V, 15 A power adapter (W4014000). Input amperes are not in the specifications table. | 120 V / 240 V, single-phase, 50/60 Hz. Input amperes and a plug name are not in the specifications list. |
| Wire or rod size | Mild steel .023–.035 in. (0.6–0.9 mm). Stainless .030–.035 in. (0.8–0.9 mm). Aluminum .030–.045 in. (0.8–1.2 mm). The introduction also says up to .045 in. solid wire, up to .052 in. cored wire, rods up to 5/32 in., and TIG rods up to 3/16 in. Spools 4, 8, and 12 in. | Not published by manufacturer |
| Weight | Specifications table: 63 lb (28.6 kg). The same brochure’s introduction says “weighing in at 53 lbs. (24 kg).” | 41 lb (18.5 kg). |
| Material thickness | Maximum plate thickness 1/2 in. (12.7 mm). | The page says it can weld materials up to 1/2 inch thick. |