Home CompareSquare Wave TIG 200 vs Rebel EMP 235ic
Square Wave TIG 200 vs Rebel EMP 235ic
Same fields. Each cell is that model's published text. A blank stays "Not published by manufacturer." The outlet chip does not hide either column.
| Spec | Square Wave TIG 200 | Rebel EMP 235ic |
|---|---|---|
| Process | AC/DC TIG and stick. | MIG, TIG, and stick. The wire table includes flux-cored diameters in the ordering copy: up to .052 in. cored wire. |
| Output amp range | 120 V: TIG 10–125 A and stick 10–90 A. 230 V: TIG 10–200 A and stick 10–170 A. A footnote prints 120 V AC TIG 110 A / 25%. | Current range 5–150 A on 120 V and 5–250 A on 230 V. Maximum output 250 A / 30 V. |
| Rated duty cycle | 120 V TIG: 125 A/25%, 100 A/40%, 85 A/60%. 120 V stick: 75 A/20%, 65 A/60%. 230 V TIG: 200 A/25%, 160 A/40%, 130 A/60%. 230 V stick: 170 A/20%, 100 A/60%. | At 104°F (40°C): MIG 120 A / 19 V at 40% on 120 V and 235 A / 26 V at 40% on 230 V. Stick 90 A / 23.6 V at 40% on 120 V and 210 A / 28.4 V at 25% on 230 V. TIG 130 A / 15.2 V at 40% on 120 V and 240 A / 19.6 V at 40% on 230 V. |
| Input voltage and plug | 120/1/50/60 and 230/1/50/60. Input current at those rated outputs runs from 14 A to 21 A on 120 V and from 13 A to 25 A on 230 V. The highest 120 V figure is 21 A and the highest 230 V figure is 25 A. 120/230 V input cords are included. | Primary voltage 120 VAC and 208/230 VAC, 1-phase, 50/60 Hz. Supply range 90–270 VAC. Supply plug 230 V, NEMA 6-50P. A separate accessory is a 230 V to 120 V, 15 A power adapter (W4014000). Input amperes are not in the specifications table. |
| Wire or rod size | Not published by manufacturer | Mild steel .023–.035 in. (0.6–0.9 mm). Stainless .030–.035 in. (0.8–0.9 mm). Aluminum .030–.045 in. (0.8–1.2 mm). The introduction also says up to .045 in. solid wire, up to .052 in. cored wire, rods up to 5/32 in., and TIG rods up to 3/16 in. Spools 4, 8, and 12 in. |
| Weight | 46 lb (21 kg). Dimensions 14 x 10.75 x 19.25 in. | Specifications table: 63 lb (28.6 kg). The same brochure’s introduction says “weighing in at 53 lbs. (24 kg).” |
| Material thickness | Not published by manufacturer | Maximum plate thickness 1/2 in. (12.7 mm). |
Outlet check, Square Wave TIG 200 · Outlet check, Rebel EMP 235ic